〈1〉頭道底漆：填充工件底層的砂痕及微孔，增加下層涂料的附著力，也具缺陷指示作用。

First coat primer: Fill the sand marks and micropores on the bottom layer of the workpiece, increase the adhesion of the lower layer coating, and also serve as a defect indicator.

〈2〉中涂底漆：很重要的涂層部分，為面漆準備一個完整光滑的工作面，完成所有底漆工作的后一道工序，增加介入層的附著力以及具備一定的隔離作用，以保證面漆的質量穩定性。

Intermediate primer: an important coating part, preparing a complete and smooth working surface for the topcoat, completing the subsequent process of all primer work, increasing the adhesion of the intervention layer and having a certain isolation effect to ensure the quality stability of the topcoat.

〈3〉面漆：面漆分為單層漆和多層漆，是色彩的確定層和裝飾保護層，單層漆我們通稱為素色漆，也稱普通漆，可以一層完成。多層漆分銀粉系列漆和珍珠系列漆，分雙層及多層施工工序完成的涂料，銀粉漆是由特制鋁質材料經研而成，具有較高的保護性及戶外穩定性和很強的可觀性，珍珠系列漆是由云母片及貝殼等材料通過高科技提制而成，是色彩豐富裝飾性極強的涂料。面漆部分的噴涂質量要求很高，要做到清潔、豐滿、光亮、不垂、不掛、光澤均勻、不漏噴、不花槍、流平好、不咬底、不浮躁、不偏色，這些全方面做到位，一氣呵成確實不是件容易事，需要極豐富的經驗和故障預排能力。

<3>Topcoat: Topcoat is divided into single-layer paint and multi-layer paint, which are the color determining layer and decorative protective layer. Single layer paint is commonly referred to as plain paint, also known as ordinary paint, and can be completed in one layer. Multi layer paint can be divided into silver powder series paint and pearl series paint, which are coatings completed through double-layer and multi-layer construction processes. Silver powder paint is made from specially made aluminum materials, which have high protection, outdoor stability, and strong observability. Pearl series paint is made from materials such as mica sheets and shells through high-tech extraction, and is a high-end coating with rich colors and strong decorative properties. The spraying quality requirements for the topcoat are very high. It is necessary to achieve cleanliness, fullness, brightness, no sagging, no hanging, uniform gloss, no leakage, no splashing, good leveling, no biting, no impatience, and no color deviation. All of these are done well in all aspects, and it is not easy to work in one go. It requires extremely rich experience and troubleshooting ability.

鈑金噴漆漆面處理： 顧名思義，就是面漆后一道工序，待漆面干固后處理其上面的瑕疵，盡了大的努力都會流下一部分不十分的地方，那就只有后期補救了，其實噴涂得再滿意的漆面都不是十分的，裝車油漆都會有輕微的細魚鱗狀現象，我們通稱桔皮現象，這是漆膜在流平過程中的干燥時差所產生的自然現象，當然一般人是難以察覺的，要用級的欣賞水平才能發覺，所以要騙過的眼睛，就只有進行漆面處理了，我們稱為“鏡面處理”。

Sheet metal spray painting and paint surface treatment: As the name suggests, it is a process after the topcoat is applied, and the defects on the surface are treated after the paint surface is dried and solidified. After making great efforts, some imperfect areas will flow down, and only later remedial measures can be taken. In fact, even the most satisfactory paint surface is not very perfect, and there will be slight fish scale like phenomena in car paint. We commonly refer to this as the orange peel phenomenon, which is a natural phenomenon caused by the drying time difference of the paint film during the leveling process. Of course, it is difficult for most people to detect, and it requires an expert level of appreciation. Therefore, to deceive the eyes of experts, the only way is to perform paint surface treatment, which is called "mirror treatment". Face treatment.

先用1500-2000目的美容砂紙進行整平研磨〈有必要時可用2500目的〉，然后用浮巖或陶土成分組成的粗蠟進行磨切，處理掉砂紙痕跡，下一步用細切蠟進行研磨〈不含硅〉，處理掉粗蠟痕跡，然后用還原劑處理以達到光澤，再用鏡面處理劑徹底光環及抹痕，這時油漆以達到深層光澤了，后一道工序就是封釉，這樣就可以達到級的漆面效果了。

First, use 1500-2000 mesh beauty sandpaper for leveling and grinding (2500 mesh can be used if necessary), then use rough wax composed of pumice or clay components for grinding and cutting to remove the sandpaper marks. Next, use fine cut wax for grinding (without silicon) to remove the rough wax marks. Then, use a reducing agent to achieve perfect gloss, and then thoroughly remove the halo and scratch with a mirror treatment agent. At this point, the paint achieves a deep gloss. The next step is to seal the glaze, which can achieve an expert level perfect paint surface effect.